 |
BioPro380 General Information and Specifications
- Dimensions: 64"w x 34"d x 91"h. Overall height adjustable +/- 2”
- Weight: Approximately 675 Lbs. (empty).
- Capacity: 100 gallons oil yields up to 100 gallons (380 liters) of finished fuel
- Batch Sizes: - Capable of processing 50, 75, or 100 gallons of oil feedstock (190, 284, or 380 liters).
- Construction: TIG welded 304 stainless steel body; Powder coated carbon steel covers.
- Electrical: 220 VAC / 30 AMP & 110 VAC / 15 Amp Circuit. Dedicated Circuits are preferred but not required.
- Controls: AUTO mode controlled by program logic controller;
Start button initiates the automated process;
MANUAL mode controlled by switch actuation.
- Reaction Method: Acid-catalyzed esterification of free fatty acids
Then base-catalyzed transesterification of triglycerides;
- Method: Triple-stage turbulent water wash.
1) Mist Spray, 2) Mist & Agitation, 3) Mist & Agitation
- Batch Time: Reaction Time – approximately 8 hrs;
Initial settling - 16 hrs;
Water wash –(total three (3) cycles, approximately14 hrs;
Drying cycle - Approx 10 hrs:
- Total Processing Time: Approx. 48 hours start to finish.
|
Items You Will Need To Get Started:
- 100 Gallons of new or used filtered vegetable oil or oil derived from animal fats (triglycerides
- Minimum 400 micron, or finer, filter to strain the oil
- 20 Gallons of methanol (racing fuel; 99.99% pure)
- 3040 grams Lye (Sodium Hydroxide - NaOH) or 4700 grams Caustic Potash (Potassium Hydroxide - KOH)* *Recommended
- 380 mL Sulfuric Acid (93% Purity or higher) - Not common battery acid
- 100 Gallons of fresh standing water (can also be connected directly to a pressurized water line)
- 100 Gallon container for water in (or connect to a clean, pressurized water source)
- 100 Gallon container for water out (or connect directly to a drain)
- Air tight storage containers for methanol, lye/caustic potash, and sulfuric acid
- Protective gloves, face mask, apron, and safety goggles (included)
- Transfer hoses, scales, and measuring cups (included)
- For your safety and convenience, we suggest obtaining a methanol transfer and oil/grease transfer pump
- (1) 110-120 volt / 15 amp & (1) 220 volt / 30 amp AC power source
|
|
